Differences

This shows you the differences between two versions of the page.

--- build_raid_1_mirror_array_adaptec_1430sa_after_operating_system_installed [2020/06/21 05:00] – wikiadmin
+++ build_raid_1_mirror_array_adaptec_1430sa_after_operating_system_installed [2020/06/21 05:23] – wikiadmin
@@ Line 89: / Line 89: @@
 {{:20200619_114844_create_array_web_lg.jpg?nolink|}}
-Next, press the space-bar on each of the drives in turn (on port 0 and then on port 1 or 2 as the case may be), so that both of the drives show in the top right side of the screen under “Selected Drives.” Then, press the ENTER key.
+Next, press the space-bar on each of the drives in turn (on port 00 and then on port 01 or 02 as the case may be),
+{{:20200619_114901_select_drives_for_array_web_lg.jpg?nolink|}}
+{{:20200619_114930_select_drive_00.jpg?nolink|}}
+{{:20200619_114941_select_drive_02.jpg?nolink|}}
+so that both of the drives show in the top right side of the screen under “Selected Drives.”
+{{:20200619_114959_selected_drives.jpg?nolink|}}
+Then, press the ENTER key.
 You will then arrive the “Array Properties” Screen. Select “RAID 1” as the type of RAID you want to use and press the Enter key.
+{{:20200619_115029_raid_1.jpg?nolink|}}
+Next type in the RAID Array Label (Array Name) that you want to use, such as ARRAY1 or EXCHANGE2010 and press the Enter key.
+{{:20200619_115221_array_label.jpg?nolink|}}
+{{:20200619_115234_array_label_2.jpg?nolink|}}
-Next type in the RAID Array Name that you want to use, such as ARRAY1 and press the Enter key. When you see “Create RAID via” you must choose “BUILD” and then press the Enter key.
+When you see “Create RAID via” you must choose “BUILD” and then press the Enter key.