Differences

This shows you the differences between two versions of the page.

--- build_raid_1_mirror_array_adaptec_1430sa_after_operating_system_installed [2020/06/21 05:35] – wikiadmin
+++ build_raid_1_mirror_array_adaptec_1430sa_after_operating_system_installed [2020/06/21 05:51] – wikiadmin
@@ Line 39: / Line 39: @@
 Boot the sytem and repeatedly press CTRL + A keys together to enter the Adaptec RAID Configuration Utility. This will load into the Adaptec Raid Controller’s Bios.
 Select “Disk Utilities” from the Main Menu. While inside Disk Utilities, check that both of your hard drives are showing properly as SATA 3.0Gb/s. Then escape from Disk Utilities back to the Main Menu.
@@ Line 129: / Line 127: @@
 {{:20200619_115516_hours_to_complete.jpg?nolink|}}
-A progress screen will display the percentage of completion of the Array. It takes a very long time for the screen to display 1%. It takes approximately 15 hours to build a 1TB Array. I suppose that means it will take approximately 30 hours to build a 2TB Array.  I will let you know soon.  When finished at 100% build, there will be a message that appears: “Building the array is successfully completed.” You may now press ESC, ESC to exit the Array Configuration and type Y when prompted to exit and restart or reboot the system.
+A progress screen will display the percentage of completion of the Array.
+{{:20200619_115617_building_0_percent.jpg?nolink|}}
+It takes a very long time for the screen to display 1% (approximately 15 minutes to build 1% of the Mirror).
+{{:20200619_121304_building_1_percent.jpg?nolink|}}
+It takes approximately 15 hours to build a 1TB Array. I suppose this means it will take approximately 30 hours to build a 2TB Array.  I will let you know soon.
+When finished at 100% build, there will be a message that appears: “Building the array is successfully completed.”
+{{:20200620_081257_success_build_100_percent.jpg?nolink|}}
+You may now press ESC, ESC to exit the Array Configuration and type Y when prompted to exit and restart or reboot the system.
 Note. It is __**INCORRECTLY**__ reported that after the progress screen has reached at least 1% completion, and if you have installed Adaptec Raid Storage Manager within your operating system, then you may be able to boot to the operating system and allow the RAID controller to finish the “build” in the background while your OS is live or your server is up and running online, and also be able to monitor the progress of your mirror “build” from within Adaptec Storage Manager program. <del>I vaguely remember trying this, but I don’t want to say for certain that I have.  This could mean that you may have the alternative to press and hold the off switch on the front of the case on your computer or server to force a hard shut down, and then restart and boot into the operating system and let the “build” continue while you may monitor the percentage completion from within Adaptec Raid Storage Manager application.</del>
@@ Line 139: / Line 151: @@
 {{:wiki:20200620_081301_web_lg.jpg?nolink|}}
-Adaptec Support Knowledgebase
+{{:1592655817422_drives_and_adaptec_1430sa_controller.jpg?nolink|}}
+Source:  Adaptec Support Knowledgebase  (Link No Longer Available)