Install Config Wiki

After Running Upgrade for Ubuntu 22.04.3 LTS, including Upgrade of OnlyOffice Server, the Nginx service would not start

Anonymous (anonymous@undisclosed.example.com) — 2024-07-29T13:57:44+00:00

After Running Upgrade for Ubuntu 22.04.3 LTS, including Upgrade of OnlyOffice Server, the Nginx service would not start Note: For purposes of this article, Ubuntu server 22.04.3 LTS has NextCloud installed and hosted on Apache2 web server on standard TCP ports 80 and SSL port 443, and has OnlyOffice Server hosted on Nginx web server which is listening on non-standard port 81 and proxied to the internet through Apache2 server on the same box from standard TCP ports 80 and SSL TCP port 443. Nex…

Apache Module mod_proxy

Anonymous (anonymous@undisclosed.example.com) — 2023-07-11T20:30:19+00:00

Apache Module mod_proxy See: Apache mod_proxy library: The ability to use Apache as a reverse proxy is provided through a shared library named mod_proxy.so. This module is not enabled by default, so you must edit Apache’s httpd.conf file to enable it. You also need to enable Apache’s mod_proxy_http.so shared library.

Auto Mount External Drive at Startup in Ubuntu Server 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-07-19T19:50:18+00:00

Auto Mount External Drive at Startup in Ubuntu Server 22.04 I AM NOT TAKING ANY CHANCES OF MOUNTING ANYTHING. THERE IS A 2TB HARDWARE RAID-1 MIRROR THAT IS MOUNTED, AND I DON'T WANT THE 4TB USB SSD DRIVE TO CONFLICT WITH THAT WHEN THE SYSTEM REBOOTS. IT APPEARS THAT UBUNTU IS SWITCHING THE MOUNTS OF THE /SDA AND THE /SDB AFTER A REBOOT.

BUILD A RAID-1 MIRROR ARRAY ON ADAPTEC 1430SA AFTER AN OPERATING SYSTEM IS INSTALLED

Anonymous (anonymous@undisclosed.example.com) — 2020-06-21T06:00:59+00:00

BUILD A RAID-1 MIRROR ARRAY ON ADAPTEC 1430SA AFTER AN OPERATING SYSTEM IS INSTALLED Reprinted with permission from an article dated October 7, 2014 by Frank on Sheldon's Blog.com This procedures in this article show how to: 1. Build a Raid-1 Array on an Adaptec 1430SA RAID controller from a disk that already contains an operating system;

Building an Ubuntu LEMP Server Hosting NextCloud and OnlyOffice Document Server

Anonymous (anonymous@undisclosed.example.com) — 2020-06-19T05:33:31+00:00

Building an Ubuntu LEMP Server Hosting NextCloud and OnlyOffice Document Server Install Nginx Webserver Install PHP and PHP-FPM packages needed by Nextcloud Install and Configure PHP7.4-FPM sudo apt install php-fpm php-curl php-cli php-mysql php-gd php-common php-xml php-json php-intl php-pear php-imagick php-dev php-common php-mbstring php-zip php-soap php-bz2 -y

How to change WordPress theme using phpMyAdmin

Anonymous (anonymous@undisclosed.example.com) — 2024-07-27T15:15:16+00:00

How to change WordPress theme using phpMyAdmin If you have activated a different theme or experimental child theme (instead of first “previewing” it), and your website went down or it is throwing errors and won't permit you to login to the Admin dashboard with administrative credentials, you should still be able to change the current theme through phpMyAdmin. You may want to merely revert to the prior activated theme that was working before you activated a different troublesome theme.

How to Clear HSTS Strict Transport Security for a Particular Domain URL in Google Chrome

Anonymous (anonymous@undisclosed.example.com) — 2023-07-12T14:14:24+00:00

How to Clear HSTS Strict Transport Security for a Particular Domain URL in Google Chrome Have you been prevented from visiting a site because Google Chrome web browser says it is insecure and displays a message regarding privacy? If you read more from that warning page, it may say something about strict transport security and HSTS. It may be that the server that is hosting the website that is configured for strict transport security for one or more of its hosts (i.e. website addresses), and tha…

Configure Apache virtual host on Ubuntu Server 22.04 to act as a proxy/gateway for a separate origin Windows IIS Server within the same local network

Anonymous (anonymous@undisclosed.example.com) — 2023-07-17T05:05:06+00:00

Configure Apache virtual host on Ubuntu Server 22.04 to act as a proxy/gateway for a separate origin Windows IIS Server within the same local network Let's say you have two servers within a local area network, each of which is behind (on the “backend

Configure Certain Settings in php.ini on Ubuntu Server 22.04 for NextCloud 27.0.0

Anonymous (anonymous@undisclosed.example.com) — 2023-06-21T18:39:05+00:00

Configure Certain Settings in php.ini on Ubuntu Server 22.04 for NextCloud 27.0.0 We need to locate the php.ini file on the Ubuntu Server and then switch to that directory. :~$ cd /etc/php/8.1/apache2/ :~$ /etc/php/8.1/apache2/$ :~$ /etc/php/8.1/apache2/$ ls :~$ /etc/php/8.1/apache2/$ php.ini

Configure DKIM records in Microsoft DNS Using keys generated by MailEnable Email Server

Anonymous (anonymous@undisclosed.example.com) — 2026-02-05T16:07:33+00:00

Configure DKIM records in Microsoft DNS Using keys generated by MailEnable Email Server To set up DKIM for MailEnable on YourDomain.com using Microsoft DNS, generate the public/private key pair in MailEnable, then create a TXT record in the Microsoft

Configure Static IP Address on Ubuntu Server 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-20T14:42:16+00:00

Configure Static IP Address on Ubuntu Server 22.04 user@svr1:~$ ifconfig eno1: flags=4163 mtu 1500 inet 192.168.1.95 netmask 255.255.255.0 broadcast 192.168.1.255 inet6 fe80::d6ae:52ff:fecd:3bf8 prefixlen 64 scopeid 0x20 ether d4:ae:52:cd:3b:f8 txqueuelen 1000 (Ethernet) RX packets 156399 bytes 144274804 (144.2 MB) RX errors 0 dropped 85 overruns 0 frame 0 TX packets 43997 bytes 7998011 (7.9 MB) …

Configure TLS 1.2 as default secure Protocol On Windows Server 2008 R2 SP1

Anonymous (anonymous@undisclosed.example.com) — 2021-09-30T15:28:17+00:00

Configure TLS 1.2 as default secure Protocol On Windows Server 2008 R2 SP1 Let say you are running Exchange Server 2010 installed on Windows Server 2008 R2 SP1 x64(bit), and when you remotely open Outlook Web Access (OWA to the Exchange Server) in your Google Chrome web browser it alerts you that the installed SSL certificate is insecure. When you check the detail about the SSL certificate, the web browser is letting you know that the configured SSL protocols on the server are deprecated.

Configure Ubuntu Server 20.04 to Host NextCloud Hub 21

Anonymous (anonymous@undisclosed.example.com) — 2021-04-29T03:56:19+00:00

Configure Ubuntu Server 20.04 to Host NextCloud Hub 21 First, Install OpenSSH on Linux Ubuntu Server to Gain Remote Access After there is a fresh installation of Ubuntu 20.04.2 on RAID-1, then SSH should be installed to provide the ability to access the server to install additional prerequisites to hosting NextCloud Hub.

Configuring the Ubuntu Server Hostname and Host Domain

Anonymous (anonymous@undisclosed.example.com) — 2023-07-03T15:33:12+00:00

Configuring the Ubuntu Server Hostname and Host Domain Published: July 3, 2023 and last edited July 3, 2023 To check the server's current hostname, run this command: hostname -f To change the hostname for your server, open the file /etc/hostname in your editor:

Configuring a new install of Ubuntu Server 22.04 to run NextCloud 27.0.0

Anonymous (anonymous@undisclosed.example.com) — 2023-06-20T12:51:40+00:00

Configuring a new install of Ubuntu Server 22.04 to run NextCloud 27.0.0 This article was originally posted 06-19-2023 and last edited 06-20-2023. Requirements and Recommendations for Running NextCloud 27.0.0 on Ubuntu Server 22.04.02 LTS Server - Linux 64-bit Operating System

Create or Delete Symbolic Link in Linux and Nginx Server

Anonymous (anonymous@undisclosed.example.com) — 2023-12-07T15:30:44+00:00

Create or Delete Symbolic Link in Linux and Nginx Server Create Symbolic Link # Create Symbolic Link - Syntax ln -s [OPTIONS] FILE LINK # Example ln -s /etc/nginx/sites-available/mydomain.com /etc/nginx/sites-enabled/mydomain.com The above command will create a soft link of the file /etc/nginx/sites-available/mydomain.com at /etc/nginx/sites-enabled/mydomain.com so that the file can also be accessed using the p…

Create Raid-1 Mirror on LSI Dell Perc H200A Controller

Anonymous (anonymous@undisclosed.example.com) — 2023-06-15T19:55:44+00:00

Create Raid-1 Mirror on LSI Dell Perc H200A Controller See Video at:

Darik's Boot and Nuke (DBAN) For Disk Wiping

Anonymous (anonymous@undisclosed.example.com) — 2023-06-01T15:50:52+00:00

Darik's Boot and Nuke (DBAN) For Disk Wiping There are several ways to secure-erase your hard drive (e.g. SATA or SSD) before selling, gifting or otherwise disposing of it. Here are a few methods: * Using the DISKPART command from a Windows command prompt that was opened with

Disable OnlyOffice Document Server Online Test Example

Anonymous (anonymous@undisclosed.example.com) — 2023-09-14T12:55:55+00:00

Disable OnlyOffice Document Server Online Test Example How to disable the OnlyOffice Document Server Testing Example. When OnlyOffice Document Server is installed properly, it will display a success page from your website, which states: ONLYOFFICE Docs Community Edition installed. To edit office documents and collaborate, integrate ONLYOFFICE Docs into your sync & share app.

Download and Extract the Latest Version of NextCloud onto Ubuntu Server 22.04 having Apache2 Webserver

Anonymous (anonymous@undisclosed.example.com) — 2023-06-21T17:39:38+00:00

Download and Extract the Latest Version of NextCloud onto Ubuntu Server 22.04 having Apache2 Webserver As of the time this article was posted (06-21-2023), the latest NextCloud version was 27.0.0. Let's first plan and provision the NextCloud web space structure on the Ubuntu / Apache2 server.

Enable Strict Transport Security In Apache Virtual Host for Nextcloud

Anonymous (anonymous@undisclosed.example.com) — 2023-06-24T17:14:48+00:00

Enable Strict Transport Security In Apache Virtual Host for Nextcloud Enable HTTP Strict Transport Security While redirecting all traffic to HTTPS is good, it may not completely prevent man-in-the-middle attacks. Thus administrators are encouraged to set the HTTP Strict Transport Security header, which instructs browsers to not allow any connection to the Nextcloud instance using HTTP, and it attempts to prevent site visitors from bypassing invalid certificate warnings.

Enabling HTTPS for the Document Server

Anonymous (anonymous@undisclosed.example.com) — 2020-06-11T16:37:33+00:00

Enabling HTTPS for the Document Server To connect NextCloud to OnlyOffice document server, the latter must be running in HTTPS mode (Both the Nextcloud server and user browsers will need to make contact with document server). The following steps show how to obtain and install Let’s Encrypt TLS certificate.

Enter the Dell Service Tag manually on your Dell PowerEdge T110 II motherboard

Anonymous (anonymous@undisclosed.example.com) — 2025-11-08T19:27:51+00:00

Enter the Dell Service Tag manually on your Dell PowerEdge T110 II motherboard Power on the server and, when you see the Dell logo onscreen, then press Ctrl + Alt + Enter (or sometimes Ctrl + D) to enter the BIOS Service Mode. Go to Main → Service Tag (or Asset Tag) field.

Installing Apache2 web server, MySQL database server, and PHP language interpreter, on Ubuntu Server

Anonymous (anonymous@undisclosed.example.com) — 2020-06-08T23:20:01+00:00

Installing Apache2 web server, MySQL database server, and PHP language interpreter, on Ubuntu Server You can install these with LAMP or XAMPP. You can also install these each separately using apt from the command line. As of April, May June, 2020, Let's install Apache 2.4, MySQL 8.0 and PHP 7.4 on Ubuntu 20.04 LTS.

Install Apache2 Webserver and PHP 8.1 on Ubuntu 22.04 LTS and Secure the MySQL Database

Anonymous (anonymous@undisclosed.example.com) — 2023-06-20T18:50:48+00:00

Install Apache2 Webserver and PHP 8.1 on Ubuntu 22.04 LTS and Secure the MySQL Database ~$ sudo apt update~$ sudo apt upgrade ~$ sudo apt autoremove Reading package lists... Done Building dependency tree... Done Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

How to install and configure multiple versions of PHP in IIS (no CMD needed)

Anonymous (anonymous@undisclosed.example.com) — 2022-07-30T12:40:17+00:00

How to install and configure multiple versions of PHP in IIS (no CMD needed) Attribution: See Article Originally Published by Sirawit Praditkul on August 17, 2018 at this URL --

How to install and configure phpMyAdmin on Windows Server and IIS

Anonymous (anonymous@undisclosed.example.com) — 2024-07-23T09:36:31+00:00

How to install and configure phpMyAdmin on Windows Server and IIS See: Also see:

How to Install and Configure a Private BIND DNS Server on Ubuntu 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-07-12T01:15:29+00:00

How to Install and Configure a Private BIND DNS Server on Ubuntu 22.04 SEE: Authored there by Mantas Levinas, March 20th, 2023

How to Install a Desktop (GUI) on a Linux Ubuntu Server

Anonymous (anonymous@undisclosed.example.com) — 2020-06-07T18:42:12+00:00

How to Install a Desktop (GUI) on a Linux Ubuntu Server Ubuntu Server 20.04 LTS (or previous version) does not include a Graphical User Interface (GUI) upon installation. However, a desktop environment (a GUI) can be added after Ubuntu Server is installed. Installation is done from the command line interface (CLI) either with or without the necessity of installing or employing the task select manager utility (tasksel), which necessity will depend on the Display Manager and/or the

install LetsEncrypt CertBot for Apache2 on Ubuntu Server 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-22T15:48:50+00:00

install LetsEncrypt CertBot for Apache2 on Ubuntu Server 22.04 If you have Certbot installed and it is not being detected, then purge it. Go Here to: Remove LetsEncrypt Certbot in Order to Properly Re-Install Certbot Reinstalling Certbot properly. sudo apt install certbot python3-certbot-apache Output - Answer 'Y' when prompted near the beginning stages.

Install the Letsencypt certbot tool on Ubuntu Server 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-21T21:51:19+00:00

Install the Letsencypt certbot tool on Ubuntu Server 22.04 Install this certbot tool and make the letsencrypt folder path architecture before seting up Apache2 Virtual Host for domains. At this point, install the certbot tool and thereafter generate the SSL certificates for the Nextcloud installation.

Install Net-Tools to Ubuntu Server 22.04.02 to Use ifconfig

Anonymous (anonymous@undisclosed.example.com) — 2023-06-18T20:56:13+00:00

Install Net-Tools to Ubuntu Server 22.04.02 to Use ifconfig user1@svr1:~$ ifconfig Command 'ifconfig' not found, but can be installed with: sudo apt install net-tools user1@svr1:~$ ifconfig eno1: flags=4163 mtu 1500 inet 192.168.2.106 netmask 255.255.255.0 broadcast 192.168.2.255 inet6 fe80::d6ae:52ff:fecd:3bf8 prefixlen 64 scopeid 0x20 ether d4:ae:52:cd:3b:f8 txqueuelen 1000 (Ethernet) RX packets 3765 bytes 749288…

How to Install Nextcloud with Nginx and Let's Encrypt SSL on Ubuntu 20.04 LTS

Anonymous (anonymous@undisclosed.example.com) — 2020-06-19T23:21:18+00:00

How to Install Nextcloud with Nginx and Let's Encrypt SSL on Ubuntu 20.04 LTS Prerequisites * List ItemUbuntu 20.04 * Root privileges * ItemWhat we will do * Install Nginx Webserver * Install and Configure PHP7.4-FPM * Install and Configure MySQL Server

Install NextCloud on Ubuntu 20.04 with Nginx (LEMP Stack)

Anonymous (anonymous@undisclosed.example.com) — 2020-06-19T13:34:31+00:00

Install NextCloud on Ubuntu 20.04 with Nginx (LEMP Stack) LinuxBabe.com May 6, 2020 -- Xiao Guoan (Admin)

Install Nginx Webserver on Linux Ubuntu Server 20.04 LTS (Changing from Apache2 already installed)

Anonymous (anonymous@undisclosed.example.com) — 2020-06-10T04:42:02+00:00

Install Nginx Webserver on Linux Ubuntu Server 20.04 LTS (Changing from Apache2 already installed) It would be necessary to switch from Apache to Nginx if, for example, you want to install NextCloud and OnlyOffice Document Server on the same Ubuntu server and integrate them to work together in order to provide document creation, editing, collaboration, and cloud storage. A prerequisite for OnlyOffice Document Server is that it must run on Nginx webserver. NextCloud can run on either Apache or …

Install OnlyOffice Docs on Ubuntu server 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-29T05:24:52+00:00

Install OnlyOffice Docs on Ubuntu server 22.04 Step By Step See: Install NetTools on Ubuntu Server to enable ifconfig command sudo apt install net-tools Check the current dynamically assigned version 4 IP address on the server using ifconfig command. ifconfig eno1: flags=4163 mtu 1500 inet 192.168.2.163 netmask 255.255.255.0 broadcast 192.168.2.255 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0

Install OnlyOffice Document Server on Ubuntu 24.04 to Integrate with Nextcloud version 30.0.4

Anonymous (anonymous@undisclosed.example.com) — 2025-01-01T16:36:17+00:00

Install OnlyOffice Document Server on Ubuntu 24.04 to Integrate with Nextcloud version 30.0.4 This Article applies to installing OnlyOffice docs on Ubuntu Server 24.04 LTS along side of NextCloud 30.0.4 with NextCloud being served via Apache2 webserver on SSL port 443 and with OnlyOffice being hosted from Nginx webserver listening on non-standard port 81, plus Apache2 being configured to proxy the OnlyOffice app from port 81 on Nginx to port 80 on Apache2 (and eventually to port 443 on Apache2)…

Install ONLYOFFICE on Nexcloud Server

Anonymous (anonymous@undisclosed.example.com) — 2025-01-03T15:39:14+00:00

Install ONLYOFFICE on Nexcloud Server by Jacob Kauffmann Install ONLYOFFICE for NextCloud Here's a step-by-step tutorial for installing ONLYOFFICE Community Edition alongside an existing Nextcloud installation! You can copy/paste the commands in this video from here:

Install ONLYOFFICE for Nextcloud on the same Ubuntu Server

Anonymous (anonymous@undisclosed.example.com) — 2023-07-05T09:12:23+00:00

Install ONLYOFFICE for Nextcloud on the same Ubuntu Server This Article applies to installing OnlyOffice docs on Ubuntu 22.04 LTS along side of NextCloud 27.0.0 with NextCloud being served via Apache2 webserver with SSL on port 443 and OnlyOffice being hosted from Nginx webserver on non-standard port 81, plus Apache2 being configured to proxy the OnlyOffice app from port 81 on Nginx to port 80 on Apache2 (and eventually port 443 on Apache2). Both the NextCloud Apache Virtual Host and the OnlyO…

Install the PHP 8.1 Modules or Extensions of 'GMP' and 'BC Math' for NextCloud 27 Requirements on Ubuntu Server 24.02

Anonymous (anonymous@undisclosed.example.com) — 2023-06-24T18:15:37+00:00

Install the PHP 8.1 Modules or Extensions of 'GMP' and 'BC Math' for NextCloud 27 Requirements on Ubuntu Server 24.02 NextCloud 27 Administration Overview Page may alert you to the following: The PHP modules “gmp” and/or “bcmath” are not enabled. If you use WebAuthn passwordless authentication, these modules are required.

How to Install PhpMyAdmin on Windows Server and IIS

Anonymous (anonymous@undisclosed.example.com) — 2024-06-04T17:55:35+00:00

How to Install PhpMyAdmin on Windows Server and IIS See:

Install a renewal SSL Server Certificate for Exchange 2010 OWA in default website on Windows Server 2008 R2

Anonymous (anonymous@undisclosed.example.com) — 2021-12-06T18:21:53+00:00

Install a renewal SSL Server Certificate for Exchange 2010 OWA in default website on Windows Server 2008 R2 So, namecheap send you an email to remind you that your SSL certificate is about to expire for your Exchange Server 2010 that was installed in IIS on your Windows Server 2008 R2 O/S, and you recall buying a certificate at Namecheap.com for multiple years, but Sentigo will only issue a certificate that expires in one year at a time. So, at Namecheap, in order to issue or reissue the next …

Install smbclient on Ubuntu for NextCloud smb external storage

Anonymous (anonymous@undisclosed.example.com) — 2024-11-13T22:36:22+00:00

Install smbclient on Ubuntu for NextCloud smb external storage NextCloud has external storage support, but you can add smb/cifs support in addition to the existing available providers listed in the external storage app of Nextcloud Log into Nextcloud as an administrator. Go to Apps, and make sure External Storage is enabled.

Install Ubuntu Server v 22.04.2 LTS

Anonymous (anonymous@undisclosed.example.com) — 2023-06-14T19:57:23+00:00

Install Ubuntu Server v 22.04.2 LTS Ubuntu Server 22.04 LTS and ISO Download: Ubuntu Server Installation: See: For Community Server Documentation and Tutorials See:

How To Install Virtualmin with Webmin, LAMP, BIND, and PostFix on Ubuntu 16.04

Anonymous (anonymous@undisclosed.example.com) — 2023-07-03T14:42:27+00:00

How To Install Virtualmin with Webmin, LAMP, BIND, and PostFix on Ubuntu 16.04 See Article on Digital Ocean:

How To Install Webmin on Ubuntu 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-07-03T14:46:37+00:00

How To Install Webmin on Ubuntu 22.04 See Article on Digital Ocean:

Install OnlyOffice Document Server on Ubuntu

Anonymous (anonymous@undisclosed.example.com) — 2020-06-11T04:30:28+00:00

Install OnlyOffice Document Server on Ubuntu Preequites to OnlyOffice Document Server Community Edition Dependencies for OnlyOffice document server are Nginx webserver, PostgreSQL database server, Node.js, Redis Server, and RabbitMQ server. Install PostgreSQL

Installing Apache2 webserver, MySql or MariaDB server, and the latest PHP version, onto Linux Ubuntu Server 24.04 LTS

Anonymous (anonymous@undisclosed.example.com) — 2025-01-03T23:12:42+00:00

Installing Apache2 webserver, MySql or MariaDB server, and the latest PHP version, onto Linux Ubuntu Server 24.04 LTS We start with a fresh installation of Linux Ubuntu Server 24.04 LTS. I installed Ubuntu on a RAID-1 Mirror of two Western Digital Gold 4TB SATA drives, and the Ubuntu installer helped me create the software Raid-1 Mirror of the two drives. That process is another story that I will skip here.

Installing APCu Memcache for NextCloud 27.0 on Ubuntu 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-25T06:28:20+00:00

Installing APCu Memcache for NextCloud 27.0 on Ubuntu 22.04 Reference: APCu is a data cache, and it is available in most Linux distributions. On Red Hat/CentOS/Fedora systems install php-pecl-apcu. On Debian/Ubuntu/Mint systems install php-apcu. $ sudo apt install php-apcu [sudo] password for user: Reading package lists... Done Building dependency tree... Done Reading state information... …

Installing Microsoft Exchange Server 2016 onto Microsoft Windows Server 2016

Anonymous (anonymous@undisclosed.example.com) — 2025-11-26T19:17:12+00:00

Installing Microsoft Exchange Server 2016 onto Microsoft Windows Server 2016 * Install Microsoft Windows Server 2016 operating system (with Desktop Experience) onto your hardware (including any preconfigured RAID-1 Mirror Array) and enter your Product Code / License Key to Activate your fresh install of Server 2016 Operating System as either the Standard or Datacenter edition. Do not add any roles or features yet.

Installing NextCloud 19.0.0 on Linux Ubuntu 20.04 LTS with Apache2 Webserver

Anonymous (anonymous@undisclosed.example.com) — 2021-04-28T05:20:51+00:00

Installing NextCloud 19.0.0 on Linux Ubuntu 20.04 LTS with Apache2 Webserver Open PhpMyAdmin and Create a Database: Example: database name: yourusername_nextcloud Select the Database from the left panel Create Username - yourusername - and Grant All Privileges for the username on the database.

Installing NextCloud 27.0.0 on Ubuntu Server 22.04 LTS

Anonymous (anonymous@undisclosed.example.com) — 2023-06-20T19:09:24+00:00

Installing NextCloud 27.0.0 on Ubuntu Server 22.04 LTS Here is the “Example installation” contained in the NextCloud Documentation at: Example installation on Ubuntu 22.04 LTS You can use .deb packages to install the required and recommended modules for a typical Nextcloud installation, using Apache and MariaDB (or MySql), by issuing the following commands in a terminal:

Installing OnlyOffice Document Server on the same Machine as NextCloud is Installed

Anonymous (anonymous@undisclosed.example.com) — 2023-06-19T02:37:20+00:00

Installing OnlyOffice Document Server on the same Machine as NextCloud is Installed ONLYOFFICE Document Server can be installed on the same Ubuntu O/S machine as your Nextcloud instance or on a different one. In case you select the first variant, you will need to set up a custom port for Document Server as by default port for both ONLYOFFICE Document Server and Nextcloud is TCP port 80.

Installing PHP 8.1.12 for Windows IIS 10

Anonymous (anonymous@undisclosed.example.com) — 2022-10-30T00:07:36+00:00

Installing PHP 8.1.12 for Windows IIS 10 Download the Non-Threadsafe x64 (64-bit) version of PHP 8.1.12 (or latest version) from here Unblock the Zip File (Properties - Clear Check Box - “This file came from another computer and is blocked . . . etc

Installing php-imagick module on Ubuntu 22.04

Anonymous (anonymous@undisclosed.example.com) — 2023-06-25T07:03:58+00:00

Installing php-imagick module on Ubuntu 22.04 Now, those who are using some PHP-based applications, for example, WordPress, and required php-imagick package or extension on their Ubuntu 22.04 server to enable image manipulation capabilities can use the given command.

Installing Win-Acme for Let's Encrypt SSL Certificates On Windows Server 2008 R2 SP1

Anonymous (anonymous@undisclosed.example.com) — 2025-07-25T13:57:05+00:00

Installing Win-Acme for Let's Encrypt SSL Certificates On Windows Server 2008 R2 SP1 Installing Win-Acme will assist us with manually installing but automatically renewing LetsEncrypt SSL Certificates on IIS for Windows Server 2008 R2 SP1. I am using Win-Acme to provide SSL Encryption for the IIS Default Web Site that is running Microsoft Exchange 2010 (an older version of Exchange). Consequently, Exchange users will be able to log into Outlook Web Access (OWA) with secure encrypted access fro…

Installing XMB Message Board

Anonymous (anonymous@undisclosed.example.com) — 2022-08-12T02:47:11+00:00

Installing XMB Message Board Upon completion of a successful installation, you should see this: Installing XMB Checking PHP version.......................................................OK Checking Directory Structure..............................

iThemes Security Free is now Solid Security Basic

Anonymous (anonymous@undisclosed.example.com) — 2024-01-23T22:30:28+00:00

iThemes Security Free is now Solid Security Basic This WordPress Plug-in has been renamed. The plugin “Log Cleaner for Solid Security” has obviously been renamed as well. Formerly known a Log Cleaner for iThemes Security. Noticed this during a plugin update on 01-23-2024

Anonymous (anonymous@undisclosed.example.com) — 2020-10-12T12:18:05+00:00

User Manual KONNWEI KW310 CAN OBDII+EOBD Code Reader Specifications * Ordered List Item 1) Display: Back lit, 128 x 64 pixel display with contrast adjustment * Operating Temperature: 0 to 60°C (32 to 140 FO) * Storage Temperature: -20 to 700C (-4 to 158 FO)

The latest version of the .NET Framework that supports older versions like .NET Framework 2.0 is .NET Framework 3.5 SP1 x64.

Anonymous (anonymous@undisclosed.example.com) — 2025-10-23T13:54:00+00:00

The latest version of the .NET Framework that supports older versions like .NET Framework 2.0 is .NET Framework 3.5 SP1 x64. Here is a breakdown of how the versions relate: Version 3.5 is the latest that includes 2.0: .NET Framework 3.5 was built incrementally on versions 2.0 and 3.0. A single installation of version 3.5 includes the Service Pack 1 updates for both 2.0 and 3.0.

Managed by NerdOnTheStreet

Anonymous (anonymous@undisclosed.example.com) — 2021-12-01T03:25:06+00:00

Managed by NerdOnTheStreet Nerd on the Street is run by Jacob Kauffmann, an IT professional with proven Linux administration skills. On the NOTS YouTube channel, Jacob explains and demonstrates server administration topics to thousands of viewers looking for help. With Managed by NOTS, you can have that expertise at the direct disposal of your business.

Microsoft Exchange Server 2016 Stopped Transporting Email on January 1st 2022

Anonymous (anonymous@undisclosed.example.com) — 2022-01-03T18:18:49+00:00

Microsoft Exchange Server 2016 Stopped Transporting Email on January 1st 2022 You notice that your Outlook Web Access shows your last received email is before midnight on New Years Eve December 31, 2021. According to , There is a bug in the FIP-FS engine that is blocking email delivery with on-premise servers starting at midnight . . . [and] . . . This is caused by Microsoft usi…

Migrating TabloTv to a Larger External USB SSD or SATA Drive

Anonymous (anonymous@undisclosed.example.com) — 2023-09-14T05:43:38+00:00

Migrating TabloTv to a Larger External USB SSD or SATA Drive See: Here’s how I, Roy ('BabbleBits') went about upgrading my Tablo’s external hard drive to a larger size drive without loosing previously recorded shows. It was pretty easy to do. My original drive was 256

Music Videos Selected by the Wiki Admin

Anonymous (anonymous@undisclosed.example.com) — 2020-05-25T19:29:53+00:00

Music Videos Selected by the Wiki Admin Eric Clapton Live VEVO Layla Steve Winwood, Eric Clapton Can't Find My Way Home Eric Clapton Live at Madison Square Garden Rambling on My Mind Tom Petty, Prince, Steve Winwood, Jeff Lynne and others

My dokuwiki is not creating new paragraphs after a double carriage return

Anonymous (anonymous@undisclosed.example.com) — 2024-11-12T16:49:32+00:00

My dokuwiki is not creating new paragraphs after a double carriage return It could be the updated version of PHP installed on the server. It was changed from PHP 7.4 to PHP 8.1 Are my paragraphs being created? Yes they are being created! I changed nothing, but somehow this article is different than the last one I created and edited just yesterday. Odd.

NextCloud 27 Your Installation Has No default phone region Set

Anonymous (anonymous@undisclosed.example.com) — 2023-06-24T19:02:03+00:00

NextCloud 27 Your Installation Has No default phone region Set Find your NextCloud “config.php” file. cd /var/www/[. . . path . . . ]/nextcloud/config/ List files in the config directory: ls config.php Use Vim or Nano to edit the config.php file.

NextCloud 27.0.0 In php.ini Increase opcache.interned_strings_buffer to a Value Higher than 8

Anonymous (anonymous@undisclosed.example.com) — 2023-06-25T08:04:07+00:00

NextCloud 27.0.0 In php.ini Increase opcache.interned_strings_buffer to a Value Higher than 8 In the Administrative Overview section of NextCloud, the following warning appeared: The PHP OPcache module is not properly configured. See the documentation for more information. The OPcache interned strings buffer is nearly full. To assure that repeating strings can be effectively cached, it is recommended to apply opcache.interned_strings_buffer to your PHP configuration with a value higher than 8.

NextCloud 27.0.0. Use system cron service to call the cron.php file every 5 minutes. Recommended for all instances. The cron.php needs to be executed by the system user "www-data".

Anonymous (anonymous@undisclosed.example.com) — 2023-06-25T08:10:19+00:00

NextCloud 27.0.0. Use system cron service to call the cron.php file every 5 minutes. Recommended for all instances. The cron.php needs to be executed by the system user "www-data". Above is the entire warning message in the Administrative -- Overview section of NextCloud.

[SOLVED] Curl error 28 operation timed out after 120000 milliseconds when Nextcloud Hub 21 is Downloading and Enabling Onlyoffice Community Document Server

Anonymous (anonymous@undisclosed.example.com) — 2021-04-30T03:03:52+00:00

[SOLVED] Curl error 28 operation timed out after 120000 milliseconds when Nextcloud Hub 21 is Downloading and Enabling Onlyoffice Community Document Server This is an under configuration of the cURL timeout setting within the Nextcloud installation. Everyone is going to receive the same error when they go into the Nextcloud Apps interface and use one-click to download and enable OnlyOffice Document Server as a prerequisite to installing the app for Nextcloud OnlyOffice Connector. The Nextclou…

Nginx: [emerg] bind() to [::]:80 failed (98: Address already in use)

Anonymous (anonymous@undisclosed.example.com) — 2020-06-17T17:33:57+00:00

Nginx: [emerg] bind() to [::]:80 failed (98: Address already in use) This fixed the problem that Nginx would not start or reload Author: rgrz Ok, now this is weird. I am pretty sure nginx service was stopped. And I don’t have apache or anything running on the server that could use port 80… Could it have been that nginx left some resource that kept port 80 busy while certbot reconfigured/restarted the server?

Online Group Chat Application Using PHP

Anonymous (anonymous@undisclosed.example.com) — 2022-10-23T23:31:48+00:00

Online Group Chat Application Using PHP See:

Anonymous (anonymous@undisclosed.example.com) — 2020-06-27T18:18:57+00:00

{"reqId":"5CcDyWwAijBhBPH2KyFb","level":3,"time":"2020-06-27T18:02:10+00:00", "remoteAddr":"**.**.**.***","user":"**********","app":"onlyoffice","method":"PUT","url":"/apps/onlyoffice/ajax/settings/address", "message":{"Exception":"GuzzleHttp\\Exception\\ConnectException","Message":"cURL error 35: error:1425F102:SSL routines:ssl_choose_client_version:unsupported protocol (see [[https://curl.haxx.se/libcurl/c/libcurl-errors.html]] )","Code":0,"Trace": [{"file":"/var/www/mydomain_com/nextclo…

Anonymous (anonymous@undisclosed.example.com) — 2023-04-25T19:21:54+00:00

Where to Download older Versions of Quickbooks Pro Versions 2005 to 2016 This could help you move and install your Quickbooks installation to a new computer. If you lost your original product license certificate, then you may need to expose the currently installed License Number and Product Number from your currently installed Quickbooks Pro version.

How to Remove DocumentServer Example Service from OnlyOffice Document Server Installation

Anonymous (anonymous@undisclosed.example.com) — 2024-07-28T19:55:06+00:00

How to Remove DocumentServer Example Service from OnlyOffice Document Server Installation See: Thank you CSchmidtDD Christof T. InstallConfig's Note: ds:example service is NOT disabled by default, at least not in my installation on Ubuntu using the community-edition, and, apparently it is also NOT disabled when using the enterprise-edition installation guide.

Remove LetsEncrypt Certbot in Order to Properly Re-Install Certbot

Anonymous (anonymous@undisclosed.example.com) — 2023-06-22T16:22:57+00:00

Remove LetsEncrypt Certbot in Order to Properly Re-Install Certbot [SOLVED] Certbot --apache. The requested apache plugin does not appear to be installed. Check the version (which would indicate something is installed, but possibly the installation command wasn't exactly correct to install the plugin that integrates best with apache).

Remove "Proudly Powered By WordPress" from Twenty Fourteen Theme

Anonymous (anonymous@undisclosed.example.com) — 2023-09-29T19:31:28+00:00

Remove "Proudly Powered By WordPress" from Twenty Fourteen Theme * Log into your WordPress site as an administrator * On the left menu, go to “Appearance” and select “Customize” * In the customizer, select “Additional CSS” * Insert the following (cascading style sheet) code

Retrieve Windows 10 or 11 Product Key From the UEFI Using PowerShell

Anonymous (anonymous@undisclosed.example.com) — 2025-11-09T21:52:22+00:00

Retrieve Windows 10 or 11 Product Key From the UEFI Using PowerShell Open a Windows PowerShell (aka Terminal) with Administrative Privileges, and type or paste (right click) the following command next to your UserName> prompt, including the parenthesis () as part of the command:

Windows - How to Run Multiple Versions of PHP in IIS

Anonymous (anonymous@undisclosed.example.com) — 2022-07-30T12:35:26+00:00

Windows - How to Run Multiple Versions of PHP in IIS Attribution: Author: Kumar Kush June 5, 2012 at 3:45 Kumar Kush - Banking Associate at State Bank of India Jammu, India Published in the comments at Stackoverflow.com All right. Here's the solution. Different PHP versions can be enabled and running side-by-side in IIS7. Here's the procedure that I have successfully tested on my machin…

Setting a Static IP Address in Ubuntu 24.04

Anonymous (anonymous@undisclosed.example.com) — 2024-12-29T17:34:57+00:00

Setting a Static IP Address in Ubuntu 24.04 See: First Backup Your network configuration file that contains your DHCP default. user@svr: cd /etc/netplan [Enter] user@svr:/etc/netplan$ ls [Enter] 50-cloud-init.yaml user@svr:/etc/netplan$ sudo cp 50-cloud-init.yaml 50-cloud-init.yaml-bak [Enter] user@svr:/etc/netplan$ ls [Enter] 50-cloud-init.yaml 50-cloud-init.yaml-bak

Setup Apache2 Virtual Host for Your Domain Running Nextcloud 27

Anonymous (anonymous@undisclosed.example.com) — 2023-06-21T21:57:07+00:00

Setup Apache2 Virtual Host for Your Domain Running Nextcloud 27 Adding a new apache/httpd virtual host configuration for Nextcloud. Caution: You may need to first install the Letsencypt certbot tool for generating SSL Letsencrypt and install the letsencrypt directory paths architecture before creating or enabling symlinks to the virtual host SSL configuration file provided below.

[SOLVED] Can't Save Documents in WordPerfect X3 Installed on Windows 10

Anonymous (anonymous@undisclosed.example.com) — 2022-08-01T01:03:02+00:00

[SOLVED] Can't Save Documents in WordPerfect X3 Installed on Windows 10 WordPerfect X3 is just installed on Windows 10. WordPerfect is launched and Document1 cannot be saved to disk. The Save Button is greyed-out. There is no way to select the default file extension, such as *.wpd

[Solved] Cannot Remove Pinned Item from Quick Access

Anonymous (anonymous@undisclosed.example.com) — 2023-05-30T17:47:44+00:00

[Solved] Cannot Remove Pinned Item from Quick Access See: The Quick Access “pinned” and frequent items data are kept in a file named f01b4d95cf55d32a.automaticDestinations-ms in the following folder: %AppData%\Microsoft\Windows\Recent\AutomaticDestinations

Anonymous (anonymous@undisclosed.example.com) — 2023-04-23T05:52:53+00:00

[SOLVED] Authentication Error connecting Mailspring Email Client to AOL's IMAP Mailspring cannot authenticate from Mailspring to your AOL account with your AOL Email address and your current working password, even though those credentials work for you when logging into AOL through the AOL webmail interface. Why? Because AOL is expecting to be able to get two-factor authentication (texting a security code to you), but Mailspring cannot do that yet.

[Solved] IIS Internal Server Error 500 When Accessing Your DokuWiki

Anonymous (anonymous@undisclosed.example.com) — 2022-07-15T14:46:30+00:00

[Solved] IIS Internal Server Error 500 When Accessing Your DokuWiki This may be a permissions error in writing to php_error.log. After upgrading an IIS webserver's PHP version, let's say you upgraded from PHP version 7.2.19 to PHP version 8.1.8, you may have found that some or many of your websites or certain web functions (bulletin board forums and/or phpmyadmin) were not compatible with the upgraded PHP version. So, to troubleshoot, you probably tried to access your php_errors.log with Note…

Solved - PhpList Temporary Directory For Uploading is Not Writeable

Anonymous (anonymous@undisclosed.example.com) — 2023-09-14T14:48:53+00:00

Solved - PhpList Temporary Directory For Uploading is Not Writeable SOLVED – PHPLIST TEMPORARY DIRECTORY FOR UPLOADING IS NOT WRITABLE AUGUST 14, 2015 - Originally sent to subscribers of sheldonsblog.com newsletter. This Article and Fix applies to Windows O/S running Apache webserver, MySql database, and PHP installed. (a WAMP server installation).

[Solutions for] Windows 10 "Settings App" Not Opening or Working

Anonymous (anonymous@undisclosed.example.com) — 2023-12-29T05:33:11+00:00

[Solutions for] Windows 10 "Settings App" Not Opening or Working Use the System File Checker tool to repair missing or corrupted system files. See: To do this, follow these steps: Open an elevated command prompt. To do this, go to the search box next to Windows start button, and perform a search for cmd.exe and press enter key.

Welcome to Install Config Wiki

Anonymous (anonymous@undisclosed.example.com) — 2020-05-25T19:37:10+00:00

Welcome to Install Config Wiki We hope that you find the InstallConfig.com Wiki to be useful. It's all about installing, configuring and troubleshooting. Home Topics Wiki Topics

How to Place a Video Link From Dropbox into a WordPress Webpage Block or Elementor Element

Anonymous (anonymous@undisclosed.example.com) — 2020-06-19T05:03:44+00:00

How to Place a Video Link From Dropbox into a WordPress Webpage Block or Elementor Element 1 Accepted Solution Rich Super User II ‎03-29-2019 05:47 PM @Starfox wrote: What I do is copy the link of the video I want to stream and I paste it in FV Player,

Suggested web.config for WordPress on IIS

Anonymous (anonymous@undisclosed.example.com) — 2023-10-02T15:52:32+00:00

Suggested web.config for WordPress on IIS

Anonymous (anonymous@undisclosed.example.com) — 2023-01-22T22:24:21+00:00

Windows Server 2019 with IIS 10, mod-rewrite and the following PHP Versions installed. The Website was initially using WordPress 6.0 and Twenty-Fourteen theme (having a child theme that enqueues a customer style.css add-in file that centers the theme's outer container, so that this left-justified theme is now center-justified on-screen).

Fixed Error Reloading Apache2 Service - Could not reliably determine the server's fully qualified domain name using 127.0.1.1

Anonymous (anonymous@undisclosed.example.com) — 2020-06-08T08:20:54+00:00

Fixed Error Reloading Apache2 Service - Could not reliably determine the server's fully qualified domain name using 127.0.1.1 This error occurred after I configured the first virtual host, enabled the site1.conf file from /sites-available/ directory over to the /sites-enabled/ directory using the a2ensite command, and then I tried to reload Apache2 using

Ubuntu - Extend Your Default LVM Space

Anonymous (anonymous@undisclosed.example.com) — 2023-06-29T20:01:00+00:00

Ubuntu - Extend Your Default LVM Space So, like me, you installed Ubuntu and accepted the installers default selections for lvm and now your operating volume is very small and the Ubuntu installer did not utilize the entire physical drive. There is a ton of space that is not being utilized. And, possibly, your freshly installed cloud application (NextCloud) will soon exceed the allotted space within the first week or so as a result of data uploading or synchronization.

Anonymous (anonymous@undisclosed.example.com) — 2023-04-24T13:36:18+00:00

How to Uninstall Programs while in Windows Safe mode If Windows keeps shutting down or won't start properly in normal mode, there may be a new but troubling program that was just installed or a long-existing program that has been compromised. While starting (booting) Windows in normal mode, Windows may provide you with an error alert to let you know which program may be causing the problem. For example, it may be the APC Personal Powerchute program, and the error message may be something lik…

Upgrade Ubuntu 22.04.3 LTS Including OnlyOffice Server

Anonymous (anonymous@undisclosed.example.com) — 2024-11-13T19:42:12+00:00

Upgrade Ubuntu 22.04.3 LTS Including OnlyOffice Server Article Created 11-13-2024 (Last Edited 11-13-2024) Microsoft Windows [Version 10.0.19045.5011] (c) Microsoft Corporation. All rights reserved. C:\Windows\system32>ssh user@domain.com user@domain.com's password: Welcome to Ubuntu 22.04.4 LTS (GNU/Linux 5.15.0-122-generic x86_64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/pro System information as …

Upgrading a Manual Installation of PhpList

Anonymous (anonymous@undisclosed.example.com) — 2023-09-13T12:01:11+00:00

Upgrading a Manual Installation of PhpList See: Overview If you installed phpList manually, this is the correct installation method for you. The process consists of the following steps: * Unordered List ItemDownload the archive containing the new version to your server (e.g. to your home directory)

Upgrading Software with APT on Linux Ubuntu Server 22.04.02

Anonymous (anonymous@undisclosed.example.com) — 2023-06-19T02:18:18+00:00

Upgrading Software with APT on Linux Ubuntu Server 22.04.02 Upgrading software with Apt. Apt, the Advanced Packaging Tool, is a command line application at the heart of Debian systems which handles the installation, categorization and removal of applications and their dependencies from the software repositories. Apt is available via the Terminal and we can even administrate systems using a remote connection such as SSH.

How to use TrueNAS rsync Tasks to Sync a User's NextCloud files to TrueNAS over WebDav

Anonymous (anonymous@undisclosed.example.com) — 2024-11-26T13:05:01+00:00

How to use TrueNAS rsync Tasks to Sync a User's NextCloud files to TrueNAS over WebDav See Video at: How to Use Truenas to backup a User's Nextcloud Files. By: Sauber-Lab UK Dated: Apr 8, 2022

How to remove NextCloud apps from the Terminal

Anonymous (anonymous@undisclosed.example.com) — 2020-06-28T03:34:28+00:00

How to remove NextCloud apps from the Terminal The occ console is located in the Nextcloud sub-directory, so you need to change to that directory first (so customize the path in the following cd command to lead to the NextCloud sub-directory): cd /var/www/PATH_TO/nextcloud

Using Windows DiskPart Tool to Reset External USB SSD Drive to Factory

Anonymous (anonymous@undisclosed.example.com) — 2024-01-03T02:34:01+00:00

Using Windows DiskPart Tool to Reset External USB SSD Drive to Factory Right click on the Windows Button and Left Click on Run. Type DiskPart in the text input line and press enter. Next to the DISKPART> prompt, enter the following commands. Make sure to select he proper drive # that you want to

How to verify the checksum of a downloaded file in Windows

Anonymous (anonymous@undisclosed.example.com) — 2024-01-06T09:41:45+00:00

How to verify the checksum of a downloaded file in Windows Here is a way of verifying the checksum, for example, of a BIOS update file that would be downloaded from Dell Support website for the purpose of updating the BIOS on the motherboard of a particular model Dell PowerEdge T110 II Server.